- use JSoup parser for selective rewrite of html body <a href= links only,
instead of regex which rewrites also header href/src links
- this improves display of pages which use header <base> tag
- tags with src attribute are taken from original location (like css) improving display and are not routed trough the indexer
Disadvantage: scripting links will drop out of proxy
Setting of the servlet through web.xml exclusivly (in case one would like to quickly switch back to the YaCyProxyServlet,
leaving the existing code of YaCyProxyServlet untouched available)
- should be investigated in more detail to look for additional implications
Remove "yacyaction" from proxyservlet as it was only needed for removed interaction routines.
- find best fittng identifier (url) by checking all given dc:identifier in record (many entries proviede several identifiers)
as identifier is currently a multivalued field use "getParams" in preference of splitting the 1st string by ";"
- add resolve DOI:... identifier via http://dx.doi.org/
processes in favor of throwaway-processes. The control mechanism does
less often report a 'queue full' message to the busy loop which then
does not perform a long busy waiting; instead all requests are queued
and new loader processes are started if necessary up to a given limit
(as set before)
instead of TreeMaps)
- enhanced memory footprint of database indexes (by introduction of
optimize calls)
- optimize calls shrink the amount of used memory for index sets if they
are not changed afterwards any more
- move htroot exist check from old httpdfilehandler to startup, remove from filehandler and legacy proxyhandler
- use SwitchboardConstant.htroot where appropriate
different from normal requests. This happens if the remote solr is
actually a solrCloud; in such cases the luke request returns only the
result of the single solr peer, not the whole cloud.
also done: some refactoring.
url along with the load date. While this takes much more memory, it
eliminates database lookups for getURL() requests, which happen equally
often. This speeds up remote solr configurations.
- useful for remote installation to set any config file property
- multipe parameter can be set at once, on Windows enclose parameter in doublequotes
- special handling "adminAccount=adminuser:adminpwd" sets adminusername and md5 encoded admin-pwd
- adjusted windows startbatch to allow command line parameter handling
- remove not needed classpath calculation from startYACY_debug.bat
The resource observer is now able to recognize free disk space AND
available space for YaCy. The amount of space which is assigned for YaCy
are defined in new settings in the configuration file.
Furthermore, there is now a cleanup process which deletes files in case
that an autodelete is activated. The autodelete is now BY DEFAULT ON if
the disk space is low, which means that YaCy starts to delete documents
when the disk is full!
this hack is the occurrence of Exceptions like:
W 2014/02/11 18:51:33 ConcurrentLog GC overhead limit exceeded
java.io.IOException: GC overhead limit exceeded
at
net.yacy.cora.federate.solr.connector.AbstractSolrConnector.getDocumentById(AbstractSolrConnector.java:334)
at
net.yacy.cora.federate.solr.connector.MirrorSolrConnector.getDocumentById(MirrorSolrConnector.java:173)
at
net.yacy.cora.federate.solr.connector.ConcurrentUpdateSolrConnector.getDocumentById(ConcurrentUpdateSolrConnector.java:415)
at net.yacy.search.index.Fulltext.getMetadata(Fulltext.java:331)
at net.yacy.search.index.Fulltext.getMetadata(Fulltext.java:317)
at
net.yacy.search.query.SearchEvent.pullOneRWI(SearchEvent.java:1024)
at
net.yacy.search.query.SearchEvent.pullOneFilteredFromRWI(SearchEvent.java:1047)
at
net.yacy.search.query.SearchEvent$3.run(SearchEvent.java:1263)
Caused by: java.lang.OutOfMemoryError: GC overhead limit exceeded
at java.util.Arrays.copyOfRange(Arrays.java:3077)
at java.lang.StringCoding.decode(StringCoding.java:196)
at java.lang.String.<init>(String.java:491)
at java.lang.String.<init>(String.java:547)
at
org.apache.lucene.codecs.compressing.CompressingStoredFieldsReader.readField(CompressingStoredFieldsReader.java:187)
at
org.apache.lucene.codecs.compressing.CompressingStoredFieldsReader.visitDocument(CompressingStoredFieldsReader.java:351)
at
org.apache.lucene.index.SegmentReader.document(SegmentReader.java:276)
at
org.apache.lucene.index.BaseCompositeReader.document(BaseCompositeReader.java:110)
at
org.apache.lucene.index.IndexReader.document(IndexReader.java:436)
at
org.apache.solr.search.SolrIndexSearcher.doc(SolrIndexSearcher.java:657)
at
net.yacy.cora.federate.solr.connector.EmbeddedSolrConnector.SolrQueryResponse2SolrDocumentList(EmbeddedSolrConnector.java:230)
at
net.yacy.cora.federate.solr.connector.EmbeddedSolrConnector.getDocumentListByParams(EmbeddedSolrConnector.java:320)
at
net.yacy.cora.federate.solr.connector.AbstractSolrConnector.getDocumentById(AbstractSolrConnector.java:330)
... 7 more
This problem was analysed with the Eclipse Memory Analyser after a heap
dump, where the following problem was reported as the main Problem
Suspect:
One instance of "org.apache.solr.util.ConcurrentLRUCache" loaded by
"sun.misc.Launcher$AppClassLoader @ 0x42e940a0" occupies 902.898.256
(61,80%) bytes. The memory is accumulated in one instance of
"java.util.concurrent.ConcurrentHashMap$Segment[]" loaded by "<system
class loader>".
This memory is part of the result cache of Solr. Flushing this cache
appears the most appropriate solution to that problem.
occupied disc space. These values are also shown on the status page.
The disc space calculation shall be used for a disk-limitation of the
search index.
if load > 1 (but < 2) but only if there is enough memory (now: 0.5 GB
RAM available). The memory amount of the postprocessing is the cause
that systems block because they run into a frequent-GC chain which
almost locks the peer. If running with enough memory, the postprocessing
is fast and not damaging to the system.
Because the required RAM of 0.5 GB is never available in default
setting, the postprocessing will not run if the peer is not reconfigured
to use more memory.
introduced, it was also used for search facets. The generic search
facets are now deduced from generic solr fields which makes jena as tool
for facet semantics superfluous.
- redesigned the instance mirror class (which was a mess)
- added final method to close a searcher (which otherwise keeps a cache)
- changed cache clear method which iterates over resources and calls
clear to all caches in the searcher resources
- selecting more than one nav combines the 2 selections (with AND)
- unselecting one nav clears all selected
(e.g. select filetype:pdf and /language/fr shows ~ french pdf's only)
works fine to restrict language for local solrSearches.
More work needs to be done to make rwi/remote searches respect the modifier.language restriction.
webgraph. These cores are now accessible at
/solr/collection1/select instead /solr/select?core=collection1
and
/solr/webgraph/select instead /solr/select?core=webgraph
in addition to the old behavior to support compatibility to the old
peers. These new paths are fully solr standard-conform and will allow
the cross-linking between YaCy peers using their public solr API.
- refactored all code which uses URIMetadataRow as standard for word
hash length and word hash ordering and moved that to the class 'Word',
becuase the class URIMetadataRow defined the old metadata data structure
and should be superfluous in the future
- removed unused methods from URIMetadataRow as preparation for further
removal of that class
- since specific heuristic Twitter & Blekko is not longer available or redundant with OpenSearchHeuristic,
adjusted ConfigHeuristic to use OpensearchHeuristic settings only.
For this the default OSD search target list is made available (copied) by default and the other configs are removed.
- the return of QueryGoal.getOriginalQueryString includes the queryModifier, which are held separately in a modifier object,
but in most (all) cases just the query term is expected, clarified and renamed it to QueryGoal.getQueryString which returns
just the search term (if needed a .getOrigianlQueryString could be implemented in Queryparameters, adding the modifiers)
- started to adjust internal html href references from absolute to relative (currently it is mixed).
For future development we should prefer relative href targets (less trouble with context aware servlets)
request into a separate thread and ignores the furthure result of a
request if that does not answer within the requested time-out. This is a
try to solve a problem with the peer-ping, which hangs whenever a peer
appears to be dead or blocked.
where the size() and isEmpty() method is used only for statistics, which
happens at many locations in YaCy. If these methods are used for
structual reasons (like accessing the last element in an array) then it
may fail or cause other problems. As far as visible, this is not the
case.
As the solr servlet may not be available (e.g. no public search page, old version, individual access setting) a /solr/select error is
remembered in the seed.dna of the remote peer.
This is not permanent, as flag is not stored and the seed is reloaded on several occasions, it is just a memory of the recent past status.
Might also be set to "not available" on time-out of last try.
as BASIC were pwd is transmitted near clear text (B64enc).
This has some implication as RFC 2617 requires and recommends a password hash MD5(user:realm:pwd) for DIGEST.
!!! before activating DIGEST you have to reassign all passwords !!! to allow new calculation of the hash
- default authentication is still BASIC
- configuration at this time only manually in (DATA/settings) or defaults/web.xml (<auth-method>
- the realmname is in defaults/yacy.init adminRealm=YaCy-AdminUI
- fyi: the realmname is shown on login screen
- changing the realm name invalidates all passwords - but for security you are encouraged to do so (as localhostadmin)
- implemented to support both, old hashes for BASIC and new hashes for BASIC and DIGEST
- to differentiate old / new hash the in Jetty used hash-prefix "MD5:" is used for new pwd-hashes ( "MD5:hash" )
- all non-dht targets (previously separated into 'robinson' for dht-like
queries and 'node' for solr queries) are non 'extra' peers, which are
queries using solr
- these extra-peers are now selected using a ranking on last-seen,
peer-tag-matches, node-peer flags, peer age, and link count. The ranking
is done using a weight and a random factor.
- the number of extra peers is 50% of the dht peers
- the dht peers now exclude too young peers to prevent bad results
during strong growth of the network
- the number of dht peers (and therefore extra-peers) is reduced when
the memory of the peer is low and/or some documents still appear in the
indexing-queue. This shall prevent a peer from deadlocks when p2p
queries are made in a fast sequence on weak hardware.
