setup-ipsec-vpn/docs/clients.md

# Configure IPsec/L2TP VPN Clients

*Read this in other languages: [English](clients.md), [简体中文](clients-zh.md).*

**Note:** You may also connect using the faster [IPsec/XAuth mode](clients-xauth.md), or set up [IKEv2](ikev2-howto.md).

After <a href="https://github.com/hwdsl2/setup-ipsec-vpn" target="_blank">setting up your own VPN server</a>, follow these steps to configure your devices. IPsec/L2TP is natively supported by Android, iOS, OS X, and Windows. There is no additional software to install. Setup should only take a few minutes. In case you are unable to connect, first check to make sure the VPN credentials were entered correctly.

---
* Platforms
  * [Windows](#windows)
  * [OS X (macOS)](#os-x)
  * [Android](#android)
  * [iOS (iPhone/iPad)](#ios)
  * [Chromebook](#chromebook)
  * [Windows Phone](#windows-phone)
  * [Linux](#linux)
* [Troubleshooting](#troubleshooting)
  * [Windows Error 809](#windows-error-809)
  * [Windows Error 628](#windows-error-628)
  * [Windows 10 version 1803](#windows-10-version-1803)
  * [macOS VPN traffic](#macos-vpn-traffic)
  * [Android 6 and above](#android-6-and-above)
  * [Chromebook issues](#chromebook-issues)
  * [Other errors](#other-errors)
  * [Additional steps](#additional-steps)

## Windows

**Note:** You may also set up and connect using the newer [IKEv2 mode](ikev2-howto.md).

### Windows 10 and 8.x

1. Right-click on the wireless/network icon in your system tray.
1. Select **Open Network and Sharing Center**.
1. Click **Set up a new connection or network**.
1. Select **Connect to a workplace** and click **Next**.
1. Click **Use my Internet connection (VPN)**.
1. Enter `Your VPN Server IP` in the **Internet address** field.
1. Enter anything you like in the **Destination name** field, and then click **Create**.
1. Return to **Network and Sharing Center**. On the left, click **Change adapter settings**.
1. Right-click on the new VPN entry and choose **Properties**.
1. Click the **Security** tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for the **Type of VPN**.
1. Click **Allow these protocols**. Be sure to select the "Challenge Handshake Authentication Protocol (CHAP)" checkbox.
1. Click the **Advanced settings** button.
1. Select **Use preshared key for authentication** and enter `Your VPN IPsec PSK` for the **Key**.
1. Click **OK** to close the **Advanced settings**.
1. Click **OK** to save the VPN connection details.

**Note:** A one-time registry change is required before connecting. See details below.

### Windows 7, Vista and XP

1. Click on the Start Menu and go to the Control Panel.
1. Go to the **Network and Internet** section.
1. Click **Network and Sharing Center**.
1. Click **Set up a new connection or network**.
1. Select **Connect to a workplace** and click **Next**.
1. Click **Use my Internet connection (VPN)**.
1. Enter `Your VPN Server IP` in the **Internet address** field.
1. Enter anything you like in the **Destination name** field.
1. Check the **Don't connect now; just set it up so I can connect later** checkbox.
1. Click **Next**.
1. Enter `Your VPN Username` in the **User name** field.
1. Enter `Your VPN Password` in the **Password** field.
1. Check the **Remember this password** checkbox.
1. Click **Create**, and then **Close**.
1. Return to **Network and Sharing Center**. On the left, click **Change adapter settings**.
1. Right-click on the new VPN entry and choose **Properties**.
1. Click the **Options** tab and uncheck **Include Windows logon domain**.
1. Click the **Security** tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for the **Type of VPN**.
1. Click **Allow these protocols**. Be sure to select the "Challenge Handshake Authentication Protocol (CHAP)" checkbox.
1. Click the **Advanced settings** button.
1. Select **Use preshared key for authentication** and enter `Your VPN IPsec PSK` for the **Key**.
1. Click **OK** to close the **Advanced settings**.
1. Click **OK** to save the VPN connection details.

**Note:** This <a href="#windows-error-809">one-time registry change</a> is required if the VPN server and/or client is behind NAT (e.g. home router).

To connect to the VPN: Click on the wireless/network icon in your system tray, select the new VPN entry, and click **Connect**. If prompted, enter `Your VPN Username` and `Password`, then click **OK**. You can verify that your traffic is being routed properly by <a href="https://www.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".

If you get an error when trying to connect, see <a href="#troubleshooting">Troubleshooting</a>.

## OS X

**Note:** You may also connect using the faster [IPsec/XAuth mode](clients-xauth.md), or set up [IKEv2](ikev2-howto.md).

1. Open System Preferences and go to the Network section.
1. Click the **+** button in the lower-left corner of the window.
1. Select **VPN** from the **Interface** drop-down menu.
1. Select **L2TP over IPSec** from the **VPN Type** drop-down menu.
1. Enter anything you like for the **Service Name**.
1. Click **Create**.
1. Enter `Your VPN Server IP` for the **Server Address**.
1. Enter `Your VPN Username` for the **Account Name**.
1. Click the **Authentication Settings** button.
1. In the **User Authentication** section, select the **Password** radio button and enter `Your VPN Password`.
1. In the **Machine Authentication** section, select the **Shared Secret** radio button and enter `Your VPN IPsec PSK`.
1. Click **OK**.
1. Check the **Show VPN status in menu bar** checkbox.
1. **(Important)** Click the **Advanced** button and make sure the **Send all traffic over VPN connection** checkbox is checked.
1. Click the **TCP/IP** tab, and make sure **Link-local only** is selected in the **Configure IPv6** section.
1. Click **OK** to close the Advanced settings, and then click **Apply** to save the VPN connection information.

To connect to the VPN: Use the menu bar icon, or go to the Network section of System Preferences, select the VPN and choose **Connect**. You can verify that your traffic is being routed properly by <a href="https://www.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".

## Android

**Note:** You may also connect using the faster [IPsec/XAuth mode](clients-xauth.md), or set up [IKEv2](ikev2-howto.md).

1. Launch the **Settings** application.
1. Tap **More...** in the **Wireless & Networks** section.
1. Tap **VPN**.
1. Tap **Add VPN Profile** or the **+** icon at top-right of screen.
1. Enter anything you like in the **Name** field.
1. Select **L2TP/IPSec PSK** in the **Type** drop-down menu.
1. Enter `Your VPN Server IP` in the **Server address** field.
1. Enter `Your VPN IPsec PSK` in the **IPSec pre-shared key** field.
1. Tap **Save**.
1. Tap the new VPN connection.
1. Enter `Your VPN Username` in the **Username** field.
1. Enter `Your VPN Password` in the **Password** field.
1. Check the **Save account information** checkbox.
1. Tap **Connect**.

Once connected, you will see a VPN icon in the notification bar. You can verify that your traffic is being routed properly by <a href="https://www.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".

If you get an error when trying to connect, see <a href="#troubleshooting">Troubleshooting</a>.

## iOS

**Note:** You may also connect using the faster [IPsec/XAuth mode](clients-xauth.md), or set up [IKEv2](ikev2-howto.md).

1. Go to Settings -> General -> VPN.
1. Tap **Add VPN Configuration...**.
1. Tap **Type**. Select **L2TP** and go back.
1. Tap **Description** and enter anything you like.
1. Tap **Server** and enter `Your VPN Server IP`.
1. Tap **Account** and enter `Your VPN Username`.
1. Tap **Password** and enter `Your VPN Password`.
1. Tap **Secret** and enter `Your VPN IPsec PSK`.
1. Make sure the **Send All Traffic** switch is ON.
1. Tap **Done**.
1. Slide the **VPN** switch ON.

Once connected, you will see a VPN icon in the status bar. You can verify that your traffic is being routed properly by <a href="https://www.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".

## Chromebook

1. If you haven't already, sign in to your Chromebook.
1. Click the status area, where your account picture appears.
1. Click **Settings**.
1. In the **Internet connection** section, click **Add connection**.
1. Click **Add OpenVPN / L2TP**.
1. Enter `Your VPN Server IP` for the **Server hostname**.
1. Enter anything you like for the **Service name**.
1. Make sure **Provider type** is **L2TP/IPSec + pre-shared key**.
1. Enter `Your VPN IPsec PSK` for the **Pre-shared key**.
1. Enter `Your VPN Username` for the **Username**.
1. Enter `Your VPN Password` for the **Password**.
1. Click **Connect**.

Once connected, you will see a VPN icon overlay on the network status icon. You can verify that your traffic is being routed properly by <a href="https://www.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".

If you get an error when trying to connect, see <a href="#troubleshooting">Troubleshooting</a>.

## Windows Phone

Users with Windows Phone 8.1 and above, try <a href="http://forums.windowscentral.com/windows-phone-8-1-preview-developers/301521-tutorials-windows-phone-8-1-support-l2tp-ipsec-vpn-now.html" target="_blank">this tutorial</a>. You can verify that your traffic is being routed properly by <a href="https://www.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".

## Linux

See [Linux VPN Clients](#linux-vpn-clients).

## Troubleshooting

*Read this in other languages: [English](clients.md#troubleshooting), [简体中文](clients-zh.md#故障排除).*

### Windows Error 809

> The network connection between your computer and the VPN server could not be established because the remote server is not responding.

To fix this error, a <a href="https://documentation.meraki.com/MX-Z/Client_VPN/Troubleshooting_Client_VPN#Windows_Error_809" target="_blank">one-time registry change</a> is required because the VPN server and/or client is behind NAT (e.g. home router). Download and import the `.reg` file below, or run the following from an <a href="http://www.winhelponline.com/blog/open-elevated-command-prompt-windows/" target="_blank">elevated command prompt</a>. **You must reboot your PC when finished.**

- For Windows Vista, 7, 8.x and 10 ([download .reg file](https://static.ls20.com/reg-files/v1/Fix_VPN_Error_809_Windows_Vista_7_8_10_Reboot_Required.reg))

  ```console
  REG ADD HKLM\SYSTEM\CurrentControlSet\Services\PolicyAgent /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
  ```

- For Windows XP ONLY ([download .reg file](https://static.ls20.com/reg-files/v1/Fix_VPN_Error_809_Windows_XP_ONLY_Reboot_Required.reg))

  ```console
  REG ADD HKLM\SYSTEM\CurrentControlSet\Services\IPSec /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
  ```

Although uncommon, some Windows systems disable IPsec encryption, causing the connection to fail. To re-enable it, run the following command and reboot your PC.

- For Windows XP, Vista, 7, 8.x and 10 ([download .reg file](https://static.ls20.com/reg-files/v1/Fix_VPN_Error_809_Allow_IPsec_Reboot_Required.reg))

  ```console
  REG ADD HKLM\SYSTEM\CurrentControlSet\Services\RasMan\Parameters /v ProhibitIpSec /t REG_DWORD /d 0x0 /f
  ```

### Windows Error 628

> The connection was terminated by the remote computer before it could be completed.

To fix this error, please follow these steps:

1. Right-click on the wireless/network icon in system tray, select **Open Network and Sharing Center**.
1. On the left, click **Change adapter settings**. Right-click on the new VPN and choose **Properties**.
1. Click the **Security** tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for **Type of VPN**.
1. Click **Allow these protocols**. Be sure to select the "Challenge Handshake Authentication Protocol (CHAP)" checkbox.
1. Click the **Advanced settings** button.
1. Select **Use preshared key for authentication** and enter `Your VPN IPsec PSK` for the **Key**.
1. Click **OK** to close the **Advanced settings**.
1. Click **OK** to save the VPN connection details.

![Select CHAP in VPN connection properties](images/vpn-properties.png)

### Windows 10 version 1803

If you are unable to connect using Windows 10 version 1803 or above: Edit `/etc/ipsec.conf` on the VPN server. Find the line `sha2-truncbug=yes` and replace it with `sha2-truncbug=no`. Save the file and run `service ipsec restart`.

Also, after upgrading Windows 10 version (e.g. from 1709 to 1803), you may need to re-apply the fix for [Windows Error 809](#windows-error-809) and reboot.

### macOS VPN traffic

OS X (macOS) users: If you can successfully connect using IPsec/L2TP mode, but your public IP does not show `Your VPN Server IP`, read the [OS X](#os-x) section above and complete this step: Click the **Advanced** button and make sure the **Send all traffic over VPN connection** checkbox is checked. Then re-connect the VPN.

### Android 6 and above

If you are unable to connect using Android 6 or above:

1. Tap the "Settings" icon next to your VPN profile. Select "Show advanced options" and scroll down to the bottom. If the option "Backward compatible mode" exists (see image below), enable it and reconnect the VPN. If not, try the next step.
1. Edit `/etc/ipsec.conf` on the VPN server. Find `sha2-truncbug=yes` and replace it with `sha2-truncbug=no`. Save the file and run `service ipsec restart` (<a href="https://libreswan.org/wiki/FAQ#Configuration_Matters" target="_blank">Ref</a>).

![Android VPN workaround](images/vpn-profile-Android.png)

### Chromebook issues

Chromebook users: If you are unable to connect, try these steps: Edit `/etc/ipsec.conf` on the VPN server. Find the line `phase2alg=...` and append `,aes_gcm-null` at the end. Save the file and run `service ipsec restart`.

### Other errors

If you encounter other errors, refer to the links below:

* http://www.tp-link.com/en/faq-1029.html
* https://documentation.meraki.com/MX-Z/Client_VPN/Troubleshooting_Client_VPN#Common_Connection_Issues   
* https://blogs.technet.microsoft.com/rrasblog/2009/08/12/troubleshooting-common-vpn-related-errors/   

### Additional steps

Please try these additional troubleshooting steps:

First, restart services on the VPN server:

```bash
service ipsec restart
service xl2tpd restart
```

If using Docker, run `docker restart ipsec-vpn-server`.

Then reboot your VPN client device, and retry the connection. If still unable to connect, try removing and recreating the VPN connection, by following the instructions in this document. Make sure that the VPN credentials are entered correctly.

Check the Libreswan (IPsec) and xl2tpd logs for errors:

```bash
# Ubuntu & Debian
grep pluto /var/log/auth.log
grep xl2tpd /var/log/syslog

# CentOS & RHEL
grep pluto /var/log/secure
grep xl2tpd /var/log/messages
```

Check status of the IPsec VPN server:

```bash
ipsec status
ipsec verify
```

Show current established VPN connections:

```bash
ipsec whack --trafficstatus
```

## Linux VPN Clients

Instructions below are based on [the work of Peter Sanford](https://gist.github.com/psanford/42c550a1a6ad3cb70b13e4aaa94ddb1c). Commands must be run as `root` on your VPN client.

To set up the VPN client, first install the following packages:

```bash
# Ubuntu & Debian
apt-get update
apt-get -y install strongswan xl2tpd

# CentOS & RHEL
yum -y install epel-release
yum --enablerepo=epel -y install strongswan xl2tpd

# Fedora
yum -y install strongswan xl2tpd
```

Create VPN variables (replace with actual values):

```bash
VPN_SERVER_IP='your_vpn_server_ip'
VPN_IPSEC_PSK='your_ipsec_pre_shared_key'
VPN_USER='your_vpn_username'
VPN_PASSWORD='your_vpn_password'
```

Configure strongSwan:

```bash
cat > /etc/ipsec.conf <<EOF
# ipsec.conf - strongSwan IPsec configuration file

# basic configuration

config setup
  # strictcrlpolicy=yes
  # uniqueids = no

# Add connections here.

# Sample VPN connections

conn %default
  ikelifetime=60m
  keylife=20m
  rekeymargin=3m
  keyingtries=1
  keyexchange=ikev1
  authby=secret
  ike=aes128-sha1-modp1024,3des-sha1-modp1024!
  esp=aes128-sha1-modp1024,3des-sha1-modp1024!

conn myvpn
  keyexchange=ikev1
  left=%defaultroute
  auto=add
  authby=secret
  type=transport
  leftprotoport=17/1701
  rightprotoport=17/1701
  right=$VPN_SERVER_IP
EOF

cat > /etc/ipsec.secrets <<EOF
: PSK "$VPN_IPSEC_PSK"
EOF

chmod 600 /etc/ipsec.secrets

# For CentOS/RHEL & Fedora ONLY
mv /etc/strongswan/ipsec.conf /etc/strongswan/ipsec.conf.old 2>/dev/null
mv /etc/strongswan/ipsec.secrets /etc/strongswan/ipsec.secrets.old 2>/dev/null
ln -s /etc/ipsec.conf /etc/strongswan/ipsec.conf
ln -s /etc/ipsec.secrets /etc/strongswan/ipsec.secrets
```

Configure xl2tpd:

```bash
cat > /etc/xl2tpd/xl2tpd.conf <<EOF
[lac myvpn]
lns = $VPN_SERVER_IP
ppp debug = yes
pppoptfile = /etc/ppp/options.l2tpd.client
length bit = yes
EOF

cat > /etc/ppp/options.l2tpd.client <<EOF
ipcp-accept-local
ipcp-accept-remote
refuse-eap
require-chap
noccp
noauth
mtu 1280
mru 1280
noipdefault
defaultroute
usepeerdns
connect-delay 5000
name $VPN_USER
password $VPN_PASSWORD
EOF

chmod 600 /etc/ppp/options.l2tpd.client
```

The VPN client setup is now complete. Follow the steps below to connect.

**Note:** You must repeat all steps below every time you try to connect to the VPN.

Create xl2tpd control file:

```bash
mkdir -p /var/run/xl2tpd
touch /var/run/xl2tpd/l2tp-control
```

Restart services:

```bash
service strongswan restart
service xl2tpd restart
```

Start the IPsec connection:

```bash
# Ubuntu & Debian
ipsec up myvpn

# CentOS/RHEL & Fedora
strongswan up myvpn
```

Start the L2TP connection:

```bash
echo "c myvpn" > /var/run/xl2tpd/l2tp-control
```

Run `ifconfig` and check the output. You should now see a new interface `ppp0`.

Check your existing default route:

```bash
ip route
```

Find this line in the output: `default via X.X.X.X ...`. Write down this gateway IP for use in the two commands below.

Exclude your VPN server's IP from the new default route (replace with actual value):

```bash
route add YOUR_VPN_SERVER_IP gw X.X.X.X
```

If your VPN client is a remote server, you must also exclude your Local PC's public IP from the new default route, to prevent your SSH session from being disconnected (replace with <a href="https://www.google.com/search?q=my+ip" target="_blank">actual value</a>):

```bash
route add YOUR_LOCAL_PC_PUBLIC_IP gw X.X.X.X
```

Add a new default route to start routing traffic via the VPN server：

```bash
route add default dev ppp0
```

The VPN connection is now complete. Verify that your traffic is being routed properly:

```bash
wget -qO- http://ipv4.icanhazip.com; echo
```

The above command should return `Your VPN Server IP`.

To stop routing traffic via the VPN server:

```bash
route del default dev ppp0
```

To disconnect:

```bash
# Ubuntu & Debian
echo "d myvpn" > /var/run/xl2tpd/l2tp-control
ipsec down myvpn

# CentOS/RHEL & Fedora
echo "d myvpn" > /var/run/xl2tpd/l2tp-control
strongswan down myvpn
```

## Credits

This document was adapted from the <a href="https://github.com/StreisandEffect/streisand" target="_blank">Streisand</a> project, maintained by Joshua Lund and contributors.

## License

Note: This license applies to this document only.

Copyright (C) 2016-2018 Lin Song   
Based on <a href="https://github.com/StreisandEffect/streisand/blob/6aa6b6b2735dd829ca8c417d72eb2768a89b6639/playbooks/roles/l2tp-ipsec/templates/instructions.md.j2" target="_blank">the work of Joshua Lund</a> (Copyright 2014-2016)

This program is free software: you can redistribute it and/or modify it under the terms of the <a href="https://www.gnu.org/licenses/gpl.html" target="_blank">GNU General Public License</a> as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.