Multiple firewall bug fixes

- When FirewallD is detected, NAT is now applied via FirewallD instead
of iptables (fixes #267).
- iptables REJECT/DROP/ACCEPT rules where not being properly detected.
- iptables rules were applied even when FirewallD was detected and the
same rules were being applied via firewall-cmd.
This commit is contained in:
Nyr 2017-03-23 18:11:35 +01:00
parent 0c5af3a4f2
commit c94bc5e3b4

View File

@ -130,24 +130,28 @@ if [[ -e /etc/openvpn/server.conf ]]; then
if [[ "$REMOVE" = 'y' ]]; then
PORT=$(grep '^port ' /etc/openvpn/server.conf | cut -d " " -f 2)
PROTOCOL=$(grep '^proto ' /etc/openvpn/server.conf | cut -d " " -f 2)
IP=$(grep 'iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to ' $RCLOCAL | cut -d " " -f 11)
if pgrep firewalld; then
IP=$(firewall-cmd --direct --get-rules ipv4 nat POSTROUTING | grep '\-s 10.8.0.0/24 -j SNAT --to ' | cut -d " " -f 7)
# Using both permanent and not permanent rules to avoid a firewalld reload.
firewall-cmd --zone=public --remove-port=$PORT/$PROTOCOL
firewall-cmd --zone=trusted --remove-source=10.8.0.0/24
firewall-cmd --permanent --zone=public --remove-port=$PORT/$PROTOCOL
firewall-cmd --permanent --zone=trusted --remove-source=10.8.0.0/24
firewall-cmd --direct --remove-rule ipv4 nat POSTROUTING 0 -s 10.8.0.0/24 -j SNAT --to $IP
firewall-cmd --permanent --direct --remove-rule ipv4 nat POSTROUTING 0 -s 10.8.0.0/24 -j SNAT --to $IP
else
IP=$(grep 'iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to ' $RCLOCAL | cut -d " " -f 11)
iptables -t nat -D POSTROUTING -s 10.8.0.0/24 -j SNAT --to $IP
sed -i '/iptables -t nat -A POSTROUTING -s 10.8.0.0\/24 -j SNAT --to /d' $RCLOCAL
if iptables -L -n | grep -qE '^ACCEPT'; then
iptables -D INPUT -p $PROTOCOL --dport $PORT -j ACCEPT
iptables -D FORWARD -s 10.8.0.0/24 -j ACCEPT
iptables -D FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
sed -i "/iptables -I INPUT -p $PROTOCOL --dport $PORT -j ACCEPT/d" $RCLOCAL
sed -i "/iptables -I FORWARD -s 10.8.0.0\/24 -j ACCEPT/d" $RCLOCAL
sed -i "/iptables -I FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT/d" $RCLOCAL
fi
fi
if iptables -L -n | grep -qE 'REJECT|DROP|ACCEPT'; then
iptables -D INPUT -p $PROTOCOL --dport $PORT -j ACCEPT
iptables -D FORWARD -s 10.8.0.0/24 -j ACCEPT
iptables -D FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
sed -i "/iptables -I INPUT -p $PROTOCOL --dport $PORT -j ACCEPT/d" $RCLOCAL
sed -i "/iptables -I FORWARD -s 10.8.0.0\/24 -j ACCEPT/d" $RCLOCAL
sed -i "/iptables -I FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT/d" $RCLOCAL
fi
iptables -t nat -D POSTROUTING -s 10.8.0.0/24 -j SNAT --to $IP
sed -i '/iptables -t nat -A POSTROUTING -s 10.8.0.0\/24 -j SNAT --to /d' $RCLOCAL
if hash sestatus 2>/dev/null; then
if sestatus | grep "Current mode" | grep -qs "enforcing"; then
if [[ "$PORT" != '1194' || "$PROTOCOL" = 'tcp' ]]; then
@ -309,34 +313,39 @@ crl-verify crl.pem" >> /etc/openvpn/server.conf
fi
# Avoid an unneeded reboot
echo 1 > /proc/sys/net/ipv4/ip_forward
# Needed to use rc.local with some systemd distros
if [[ "$OS" = 'debian' && ! -e $RCLOCAL ]]; then
echo '#!/bin/sh -e
exit 0' > $RCLOCAL
fi
chmod +x $RCLOCAL
# Set NAT for the VPN subnet
iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to $IP
sed -i "1 a\iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to $IP" $RCLOCAL
if pgrep firewalld; then
# Using both permanent and not permanent rules to avoid a firewalld
# reload.
# We don't use --add-service=openvpn because that would only work with
# the default port and protocol. Using both permanent and not permanent
# rules to avoid a firewalld reload.
# the default port and protocol.
firewall-cmd --zone=public --add-port=$PORT/$PROTOCOL
firewall-cmd --zone=trusted --add-source=10.8.0.0/24
firewall-cmd --permanent --zone=public --add-port=$PORT/$PROTOCOL
firewall-cmd --permanent --zone=trusted --add-source=10.8.0.0/24
fi
if iptables -L -n | grep -qE 'REJECT|DROP'; then
# If iptables has at least one REJECT rule, we asume this is needed.
# Not the best approach but I can't think of other and this shouldn't
# cause problems.
iptables -I INPUT -p $PROTOCOL --dport $PORT -j ACCEPT
iptables -I FORWARD -s 10.8.0.0/24 -j ACCEPT
iptables -I FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
sed -i "1 a\iptables -I INPUT -p $PROTOCOL --dport $PORT -j ACCEPT" $RCLOCAL
sed -i "1 a\iptables -I FORWARD -s 10.8.0.0/24 -j ACCEPT" $RCLOCAL
sed -i "1 a\iptables -I FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT" $RCLOCAL
# Set NAT for the VPN subnet
firewall-cmd --direct --add-rule ipv4 nat POSTROUTING 0 -s 10.8.0.0/24 -j SNAT --to $IP
firewall-cmd --permanent --direct --add-rule ipv4 nat POSTROUTING 0 -s 10.8.0.0/24 -j SNAT --to $IP
else
# Needed to use rc.local with some systemd distros
if [[ "$OS" = 'debian' && ! -e $RCLOCAL ]]; then
echo '#!/bin/sh -e
exit 0' > $RCLOCAL
fi
chmod +x $RCLOCAL
# Set NAT for the VPN subnet
iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to $IP
sed -i "1 a\iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to $IP" $RCLOCAL
if iptables -L -n | grep -qE '^(REJECT|DROP)'; then
# If iptables has at least one REJECT rule, we asume this is needed.
# Not the best approach but I can't think of other and this shouldn't
# cause problems.
iptables -I INPUT -p $PROTOCOL --dport $PORT -j ACCEPT
iptables -I FORWARD -s 10.8.0.0/24 -j ACCEPT
iptables -I FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
sed -i "1 a\iptables -I INPUT -p $PROTOCOL --dport $PORT -j ACCEPT" $RCLOCAL
sed -i "1 a\iptables -I FORWARD -s 10.8.0.0/24 -j ACCEPT" $RCLOCAL
sed -i "1 a\iptables -I FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT" $RCLOCAL
fi
fi
# If SELinux is enabled and a custom port or TCP was selected, we need this
if hash sestatus 2>/dev/null; then